4Runner Rock Sliders 03-09 4Runner 4th Gen Pair Heavy Metal Off-Road


SKU: HMORRS04-68 Category:


4Runner Rock Sliders by Heavy Metal Off-Road! We CAD design and build here in the USA for a proper fit. Beefy 2 inch square tube main with 1.75 inch round DOM tube outer with kick-out. Compared to the others out there, we designed our kick-out as a 1 piece outer tube for the cleanest push-out possible! Angled at 10 degrees for maximum clearance. The main tube is also mitered at the ends to prevent any snagging.

These Sliders are no joke when it comes to side and under body protection. You need these if you want to protect your rig from rocks, trees, etc. They are also an excellent recovery point if you need to lift the vehicle via a Hi-Lift jack.

These are completely assembled weld-on units. You just need to align to the frame and weld them on. Included are one pair of Rock Sliders. Comes bare metal, ready for your own paint preference.

Fits: 2003 to 2009 4th Gen Toyota 4Runner with or without X-REAS.

  • Sold as Pair
  • 03-09 Toyota 4Runner
  • Degree Angle 10 Degree
  • 4th Generation
  • Material DOM Steel
  • Finish Bare

Additional information

Weight 100 lbs
Dimensions 68 × 8 × 22 in

1 review for 4Runner Rock Sliders 03-09 4Runner 4th Gen Pair Heavy Metal Off-Road

  1. Zack l

    I have aftermarket transfer case skids and a fuel tank skid, will these have the clearance requirement to work still?

    • Timothy Neil

      Hi Zack, as long as the skid plates don’t wrap around the outside of the frame, which most don’t, these will work just fine.

Add a review

Your email address will not be published. Required fields are marked *